Skip to main content

1 Gbps = 0.000001 Pbps

Gigabits Per Second (Gbps) to Petabits Per Second (Pbps) Converter

The Gigabits Per Second (Gbps) to Petabits Per Second (Pbps) Converter turns your Gigabit Per Second (Gbps) value into Petabits Per Second (Pbps). Type your transfer speed below — 1 Gbps = 0.000001 Pbps, covering both bit-based and byte-based transfer rate units. This free gigabit per second to petabit per second calculator works as a network speed converter, bandwidth calculator, and internet speed conversion tool. Also see: Mebibits Per Second to Megabits Per Second.

Gigabits Per Second to Petabits Per Second converter

Result

0.0001 Pbps

100 Gbps × 0.000001 = 0.0001 Pbps

How to Convert Gigabits Per Second to Petabits Per Second

"Gigabit Per Second (Gbps) to Petabit Per Second (Pbps) Diagram" — click any bar to view its data unit page, or set it as source/target.

To convert gigabits per second to petabits per second, divide by 1,000,000. Both units measure network bandwidth in bits per second—the difference is simply the scale.

Gbps: A gigabit per second is 1,000 megabits per second. Used for fiber internet and enterprise networking. Common uses include Fiber internet, enterprise networks, data center connections, 10GbE.

Pbps: A petabit per second is 1,000 terabits per second. Used for internet exchange points and submarine cable capacity. Typically used for Internet exchange points, submarine cables, global backbone networks, hyperscale interconnects. Related: Gigabits Per Second to Exabits Per Second.

1 Gbps = 0.000001 Pbps — or equivalently, 1 Pbps = 1,000,000Gbps.

Gbps to Pbps transfer rate: 1 gigabit per second equals 0.000001petabits per second — the standard bandwidth conversion rate used by this data transfer calculator.

Quick Facts: Gbps to Pbps Speed Conversion

  • Conversion factor: 1 Gbps = 0.000001 Pbps
  • Reverse factor: 1 Pbps = 1,000,000 Gbps
  • Source unit type: bit-based bandwidth
  • Target unit type: bit-based bandwidth
  • Useful for: estimating download times, comparing advertised speeds, and network capacity planning
  • Category: data transfer rate converter, network speed calculator, bandwidth converter

Steps to Convert Gigabit Per Second to Petabit Per Second

  1. Enter your gigabit per second value (Gbps) into the gigabit per second to petabit per second converter above.
  2. The equivalent petabits per second (Pbps) transfer speed updates instantly using the Gbps to Pbps conversion factor.
  3. Use the swap control to reverse the calculation and convert petabits per second back into gigabits per second.

Gbps to Pbps Conversion Formula

Here's the exact Gbps to Pbps formula in copy-paste-ready form — multiply by 0.000001 to go from gigabits per second to petabits per second, or by 1,000,000 to reverse it — followed by a quick-reference chart of the same rate conversion.

// Convert Gbps to Pbps
Pbps = Gbps × 0.000001

// Reverse: Convert Pbps to Gbps
Gbps = Pbps × 1,000,000
Gigabit Per Second (Gbps) to Petabit Per Second (Pbps) conversion formula chart
Quick-reference Gbps to Pbps conversion chart — see the full gigabit per second to petabits per second table below for more values.

Gigabit Per Second to Petabit Per Second Conversion Examples

10 Gbps = 0.00001 Pbps

50 Gbps = 0.00005 Pbps

100 Gbps = 0.0001 Pbps

500 Gbps = 0.0005 Pbps

1,000 Gbps = 0.001 Pbps

Most data transfer rate units step by powers of ten: moving up the scale (bps → Kbps → Mbps → Gbps and beyond) means multiply by 1000, moving down means divide by 1000 — usually just a matter of shifting the decimal point. What's actually being counted underneath is bits: the binary digits, 0s and 1s, that make up every network signal.

What Is Gigabit Per Second (Gbps)? Definition and Uses

A gigabit per second is 1,000 megabits per second. Used for fiber internet and enterprise networking.

The gigabit per second is a bit-based bandwidth unit measuring data transfer speed, network bandwidth, or throughput capacity. Like the units used to measure file size, it's one of several data measurement units that scale using either decimal multiples of 1,000 (SI) or binary steps of 1,024 (IEC).

Common uses: Fiber internet, enterprise networks, data center connections, 10GbE See also: Yottabytes Per Second to Mebibits Per Second.

1 Gbps = 1 × 10⁹ bits per second .

The gigabit per second can be abbreviated as Gbps; for example, 1 gigabit per second can be written as 1 Gbps.

Don't confuse Gbps with GB/s (Gigabyte Per Second) — capitalization matters here. Gbps measures bits, GB/s measures bytes, and since 1 byte = 8 bits, 1 Gbps works out to just 0.125 GB/s using the same numeral.

Gigabit Per Second Transfer Rate Unit at a Glance

Gigabit Per Second unit type, base, standard and common uses
Unit typebit-based bandwidth
SymbolGbps
Common usesFiber internet, enterprise networks, data center connections, 10GbE

What Is Petabit Per Second (Pbps)? Definition and Uses

A petabit per second is 1,000 terabits per second. Used for internet exchange points and submarine cable capacity.

The petabit per second is a bit-based bandwidth unit measuring data transfer speed, network bandwidth, or throughput capacity. Like the units used to measure file size, it's one of several data measurement units that scale using either decimal multiples of 1,000 (SI) or binary steps of 1,024 (IEC).

Common uses: Internet exchange points, submarine cables, global backbone networks, hyperscale interconnects

1 Pbps = 1 × 10¹⁵ bits per second .

The petabit per second can be abbreviated as Pbps; for example, 1 petabit per second can be written as 1 Pbps.

Don't confuse Pbps with PB/s (Petabyte Per Second) — capitalization matters here. Pbps measures bits, PB/s measures bytes, and since 1 byte = 8 bits, 1 Pbps works out to just 0.125 PB/s using the same numeral.

Petabit Per Second Transfer Rate Unit at a Glance

Petabit Per Second unit type, base, standard and common uses
Unit typebit-based bandwidth
SymbolPbps
Common usesInternet exchange points, submarine cables, global backbone networks, hyperscale interconnects

Gigabit Per Second to Petabit Per Second Conversion Table

The table below shows 100 gigabit per second measurements converted to petabits per second — scroll within the table to see the full range. Bookmark this reference table for quick lookups whenever you need to convert a value without shifting the decimal point by hand.

Gigabits Per Second to Petabits Per Second conversion values
Gigabits Per Second Petabits Per Second
1 Gbps 0.000001 Pbps
13 Gbps 0.000013 Pbps
26 Gbps 0.000026 Pbps
39 Gbps 0.000039 Pbps
52 Gbps 0.000052 Pbps
65 Gbps 0.000065 Pbps
78 Gbps 0.000078 Pbps
91 Gbps 0.000091 Pbps
104 Gbps 0.000104 Pbps
117 Gbps 0.000117 Pbps
130 Gbps 0.00013 Pbps
143 Gbps 0.000143 Pbps
156 Gbps 0.000156 Pbps
169 Gbps 0.000169 Pbps
182 Gbps 0.000182 Pbps
195 Gbps 0.000195 Pbps
208 Gbps 0.000208 Pbps
221 Gbps 0.000221 Pbps
234 Gbps 0.000234 Pbps
247 Gbps 0.000247 Pbps
260 Gbps 0.00026 Pbps
273 Gbps 0.000273 Pbps
286 Gbps 0.000286 Pbps
299 Gbps 0.000299 Pbps
312 Gbps 0.000312 Pbps
325 Gbps 0.000325 Pbps
338 Gbps 0.000338 Pbps
351 Gbps 0.000351 Pbps
364 Gbps 0.000364 Pbps
377 Gbps 0.000377 Pbps
390 Gbps 0.00039 Pbps
403 Gbps 0.000403 Pbps
416 Gbps 0.000416 Pbps
429 Gbps 0.000429 Pbps
442 Gbps 0.000442 Pbps
455 Gbps 0.000455 Pbps
468 Gbps 0.000468 Pbps
481 Gbps 0.000481 Pbps
494 Gbps 0.000494 Pbps
507 Gbps 0.000507 Pbps
520 Gbps 0.00052 Pbps
533 Gbps 0.000533 Pbps
546 Gbps 0.000546 Pbps
559 Gbps 0.000559 Pbps
572 Gbps 0.000572 Pbps
585 Gbps 0.000585 Pbps
598 Gbps 0.000598 Pbps
611 Gbps 0.000611 Pbps
624 Gbps 0.000624 Pbps
637 Gbps 0.000637 Pbps
650 Gbps 0.00065 Pbps
663 Gbps 0.000663 Pbps
676 Gbps 0.000676 Pbps
689 Gbps 0.000689 Pbps
702 Gbps 0.000702 Pbps
715 Gbps 0.000715 Pbps
728 Gbps 0.000728 Pbps
741 Gbps 0.000741 Pbps
754 Gbps 0.000754 Pbps
767 Gbps 0.000767 Pbps
780 Gbps 0.00078 Pbps
793 Gbps 0.000793 Pbps
806 Gbps 0.000806 Pbps
819 Gbps 0.000819 Pbps
832 Gbps 0.000832 Pbps
845 Gbps 0.000845 Pbps
858 Gbps 0.000858 Pbps
871 Gbps 0.000871 Pbps
884 Gbps 0.000884 Pbps
897 Gbps 0.000897 Pbps
910 Gbps 0.00091 Pbps
923 Gbps 0.000923 Pbps
936 Gbps 0.000936 Pbps
949 Gbps 0.000949 Pbps
962 Gbps 0.000962 Pbps
975 Gbps 0.000975 Pbps
988 Gbps 0.000988 Pbps
1,001 Gbps 0.001001 Pbps
1,014 Gbps 0.001014 Pbps
1,027 Gbps 0.001027 Pbps
1,040 Gbps 0.00104 Pbps
1,053 Gbps 0.001053 Pbps
1,066 Gbps 0.001066 Pbps
1,079 Gbps 0.001079 Pbps
1,092 Gbps 0.001092 Pbps
1,105 Gbps 0.001105 Pbps
1,118 Gbps 0.001118 Pbps
1,131 Gbps 0.001131 Pbps
1,144 Gbps 0.001144 Pbps
1,157 Gbps 0.001157 Pbps
1,170 Gbps 0.00117 Pbps
1,183 Gbps 0.001183 Pbps
1,196 Gbps 0.001196 Pbps
1,209 Gbps 0.001209 Pbps
1,222 Gbps 0.001222 Pbps
1,235 Gbps 0.001235 Pbps
1,248 Gbps 0.001248 Pbps
1,261 Gbps 0.001261 Pbps
1,274 Gbps 0.001274 Pbps
1,287 Gbps 0.001287 Pbps

FAQs: Gigabit Per Second to Petabit Per Second Conversion

How many petabits per second are in 1 gigabit per second?

1 Gigabit Per Second (Gbps) equals 0.000001 Petabits Per Second.

How do I convert gigabits per second to petabits per second?

Multiply the gigabit per second value by 0.000001 to get petabits per second. For example, 10 Gbps = 0.00001 Pbps.

Is gigabit per second bigger than petabit per second?

No. 1 Gbps = 0.000001 Pbps, so petabit per second is larger — 1 Pbps = 1,000,000 Gbps.

What is Gigabit Per Second (Gbps) commonly used for?

Fiber internet, enterprise networks, data center connections, 10GbE.