Skip to main content

1 Tbps = 1,000 Gbps

Terabits Per Second (Tbps) to Gigabits Per Second (Gbps) Converter

The Terabits Per Second (Tbps) to Gigabits Per Second (Gbps) Converter turns your Terabit Per Second (Tbps) value into Gigabits Per Second (Gbps). Type your transfer speed below — 1 Tbps = 1,000 Gbps, covering both bit-based and byte-based transfer rate units. This free terabit per second to gigabit per second calculator works as a network speed converter, bandwidth calculator, and internet speed conversion tool. Also see: Megabits Per Second to Tebibits Per Second.

Terabits Per Second to Gigabits Per Second converter

Result

100,000 Gbps

100 Tbps × 1,000 = 100,000 Gbps

How to Convert Terabits Per Second to Gigabits Per Second

"Terabit Per Second (Tbps) to Gigabit Per Second (Gbps) Diagram" — click any bar to view its data unit page, or set it as source/target.

To convert terabits per second to gigabits per second, multiply by 1,000. Both units measure network bandwidth in bits per second—the difference is simply the scale.

Tbps: A terabit per second is 1,000 gigabits per second. Used for backbone networks and data center interconnects. Common uses include Backbone networks, submarine cables, data center fabrics, high-speed interconnects.

Gbps: A gigabit per second is 1,000 megabits per second. Used for fiber internet and enterprise networking. Typically used for Fiber internet, enterprise networks, data center connections, 10GbE.

1 Tbps = 1,000 Gbps — which means there are 1,000gigabits per second in every terabit per second.

Tbps to Gbps transfer rate: 1 terabit per second equals 1,000gigabits per second — the standard bandwidth conversion rate used by this data transfer calculator.

Quick Facts: Tbps to Gbps Speed Conversion

  • Conversion factor: 1 Tbps = 1,000 Gbps
  • Reverse factor: 1 Gbps = 0.001 Tbps
  • Source unit type: bit-based bandwidth
  • Target unit type: bit-based bandwidth
  • Useful for: estimating download times, comparing advertised speeds, and network capacity planning
  • Category: data transfer rate converter, network speed calculator, bandwidth converter

Steps to Convert Terabit Per Second to Gigabit Per Second

  1. Enter your terabit per second value (Tbps) into the terabit per second to gigabit per second converter above.
  2. The equivalent gigabits per second (Gbps) transfer speed updates instantly using the Tbps to Gbps conversion factor.
  3. Use the swap control to reverse the calculation and convert gigabits per second back into terabits per second.

Tbps to Gbps Conversion Formula

Here's the exact Tbps to Gbps formula in copy-paste-ready form — multiply by 1,000 to go from terabits per second to gigabits per second, or by 0.001 to reverse it — followed by a quick-reference chart of the same rate conversion.

// Convert Tbps to Gbps
Gbps = Tbps × 1,000

// Reverse: Convert Gbps to Tbps
Tbps = Gbps × 0.001
Terabit Per Second (Tbps) to Gigabit Per Second (Gbps) conversion formula chart
Quick-reference Tbps to Gbps conversion chart — see the full terabit per second to gigabits per second table below for more values.

Terabit Per Second to Gigabit Per Second Conversion Examples

10 Tbps = 10,000 Gbps

50 Tbps = 50,000 Gbps

100 Tbps = 100,000 Gbps

500 Tbps = 500,000 Gbps

1,000 Tbps = 1,000,000 Gbps

Most data transfer rate units step by powers of ten: moving up the scale (bps → Kbps → Mbps → Gbps and beyond) means multiply by 1000, moving down means divide by 1000 — usually just a matter of shifting the decimal point. What's actually being counted underneath is bits: the binary digits, 0s and 1s, that make up every network signal.

What Is Terabit Per Second (Tbps)? Definition and Uses

A terabit per second is 1,000 gigabits per second. Used for backbone networks and data center interconnects.

The terabit per second is a bit-based bandwidth unit measuring data transfer speed, network bandwidth, or throughput capacity. Like the units used to measure file size, it's one of several data measurement units that scale using either decimal multiples of 1,000 (SI) or binary steps of 1,024 (IEC).

Common uses: Backbone networks, submarine cables, data center fabrics, high-speed interconnects

1 Tbps = 1 × 10¹² bits per second .

The terabit per second can be abbreviated as Tbps; for example, 1 terabit per second can be written as 1 Tbps.

Don't confuse Tbps with TB/s (Terabyte Per Second) — capitalization matters here. Tbps measures bits, TB/s measures bytes, and since 1 byte = 8 bits, 1 Tbps works out to just 0.125 TB/s using the same numeral.

Terabit Per Second Transfer Rate Unit at a Glance

Terabit Per Second unit type, base, standard and common uses
Unit typebit-based bandwidth
SymbolTbps
Common usesBackbone networks, submarine cables, data center fabrics, high-speed interconnects

What Is Gigabit Per Second (Gbps)? Definition and Uses

A gigabit per second is 1,000 megabits per second. Used for fiber internet and enterprise networking.

The gigabit per second is a bit-based bandwidth unit measuring data transfer speed, network bandwidth, or throughput capacity. Like the units used to measure file size, it's one of several data measurement units that scale using either decimal multiples of 1,000 (SI) or binary steps of 1,024 (IEC).

Common uses: Fiber internet, enterprise networks, data center connections, 10GbE

1 Gbps = 1 × 10⁹ bits per second .

The gigabit per second can be abbreviated as Gbps; for example, 1 gigabit per second can be written as 1 Gbps.

Don't confuse Gbps with GB/s (Gigabyte Per Second) — capitalization matters here. Gbps measures bits, GB/s measures bytes, and since 1 byte = 8 bits, 1 Gbps works out to just 0.125 GB/s using the same numeral.

Gigabit Per Second Transfer Rate Unit at a Glance

Gigabit Per Second unit type, base, standard and common uses
Unit typebit-based bandwidth
SymbolGbps
Common usesFiber internet, enterprise networks, data center connections, 10GbE

Terabit Per Second to Gigabit Per Second Conversion Table

The table below shows 100 terabit per second measurements converted to gigabits per second — scroll within the table to see the full range. Bookmark this reference table for quick lookups whenever you need to convert a value without shifting the decimal point by hand.

Terabits Per Second to Gigabits Per Second conversion values
Terabits Per Second Gigabits Per Second
1 Tbps 1,000 Gbps
13 Tbps 13,000 Gbps
26 Tbps 26,000 Gbps
39 Tbps 39,000 Gbps
52 Tbps 52,000 Gbps
65 Tbps 65,000 Gbps
78 Tbps 78,000 Gbps
91 Tbps 91,000 Gbps
104 Tbps 104,000 Gbps
117 Tbps 117,000 Gbps
130 Tbps 130,000 Gbps
143 Tbps 143,000 Gbps
156 Tbps 156,000 Gbps
169 Tbps 169,000 Gbps
182 Tbps 182,000 Gbps
195 Tbps 195,000 Gbps
208 Tbps 208,000 Gbps
221 Tbps 221,000 Gbps
234 Tbps 234,000 Gbps
247 Tbps 247,000 Gbps
260 Tbps 260,000 Gbps
273 Tbps 273,000 Gbps
286 Tbps 286,000 Gbps
299 Tbps 299,000 Gbps
312 Tbps 312,000 Gbps
325 Tbps 325,000 Gbps
338 Tbps 338,000 Gbps
351 Tbps 351,000 Gbps
364 Tbps 364,000 Gbps
377 Tbps 377,000 Gbps
390 Tbps 390,000 Gbps
403 Tbps 403,000 Gbps
416 Tbps 416,000 Gbps
429 Tbps 429,000 Gbps
442 Tbps 442,000 Gbps
455 Tbps 455,000 Gbps
468 Tbps 468,000 Gbps
481 Tbps 481,000 Gbps
494 Tbps 494,000 Gbps
507 Tbps 507,000 Gbps
520 Tbps 520,000 Gbps
533 Tbps 533,000 Gbps
546 Tbps 546,000 Gbps
559 Tbps 559,000 Gbps
572 Tbps 572,000 Gbps
585 Tbps 585,000 Gbps
598 Tbps 598,000 Gbps
611 Tbps 611,000 Gbps
624 Tbps 624,000 Gbps
637 Tbps 637,000 Gbps
650 Tbps 650,000 Gbps
663 Tbps 663,000 Gbps
676 Tbps 676,000 Gbps
689 Tbps 689,000 Gbps
702 Tbps 702,000 Gbps
715 Tbps 715,000 Gbps
728 Tbps 728,000 Gbps
741 Tbps 741,000 Gbps
754 Tbps 754,000 Gbps
767 Tbps 767,000 Gbps
780 Tbps 780,000 Gbps
793 Tbps 793,000 Gbps
806 Tbps 806,000 Gbps
819 Tbps 819,000 Gbps
832 Tbps 832,000 Gbps
845 Tbps 845,000 Gbps
858 Tbps 858,000 Gbps
871 Tbps 871,000 Gbps
884 Tbps 884,000 Gbps
897 Tbps 897,000 Gbps
910 Tbps 910,000 Gbps
923 Tbps 923,000 Gbps
936 Tbps 936,000 Gbps
949 Tbps 949,000 Gbps
962 Tbps 962,000 Gbps
975 Tbps 975,000 Gbps
988 Tbps 988,000 Gbps
1,001 Tbps 1,001,000 Gbps
1,014 Tbps 1,014,000 Gbps
1,027 Tbps 1,027,000 Gbps
1,040 Tbps 1,040,000 Gbps
1,053 Tbps 1,053,000 Gbps
1,066 Tbps 1,066,000 Gbps
1,079 Tbps 1,079,000 Gbps
1,092 Tbps 1,092,000 Gbps
1,105 Tbps 1,105,000 Gbps
1,118 Tbps 1,118,000 Gbps
1,131 Tbps 1,131,000 Gbps
1,144 Tbps 1,144,000 Gbps
1,157 Tbps 1,157,000 Gbps
1,170 Tbps 1,170,000 Gbps
1,183 Tbps 1,183,000 Gbps
1,196 Tbps 1,196,000 Gbps
1,209 Tbps 1,209,000 Gbps
1,222 Tbps 1,222,000 Gbps
1,235 Tbps 1,235,000 Gbps
1,248 Tbps 1,248,000 Gbps
1,261 Tbps 1,261,000 Gbps
1,274 Tbps 1,274,000 Gbps
1,287 Tbps 1,287,000 Gbps

FAQs: Terabit Per Second to Gigabit Per Second Conversion

How many gigabits per second are in 1 terabit per second?

1 Terabit Per Second (Tbps) equals 1,000 Gigabits Per Second.

How do I convert terabits per second to gigabits per second?

Multiply the terabit per second value by 1,000 to get gigabits per second. For example, 10 Tbps = 10,000 Gbps.

Is terabit per second bigger than gigabit per second?

Yes. 1 Tbps = 1,000 Gbps, so terabit per second is the larger transfer rate unit.

What is Terabit Per Second (Tbps) commonly used for?

Backbone networks, submarine cables, data center fabrics, high-speed interconnects.